📍 Los Angeles, CA  ·  C-10 #981578  ·  EVITP #4051604 ☎ (818) 302-5614
Home›Tesla Charger Installation› Los Angeles

Tesla Charger Installation in
Los Angeles, CA

At a Glance: AMY Electric installs Tesla Wall Connectors across Los Angeles. Typical installation costs $500–$1,200 including the dedicated 60A circuit, wiring, mounting, permit, and commissioning. The Wall Connector unit itself ($475) is purchased separately from Tesla. Licensed C-10 #981578. Free estimates: (818) 302-5614.

EVITP-certified Tesla Wall Connector installation for Los Angeles homes. Dedicated 60-amp circuits, clean conduit routing, Wi-Fi commissioning through the Tesla app, and full LADBS permitting. Licensed, insured, and EVITP-certified. Free estimates. Same-day service available.

☎ Call (818) 302-5614 Free Estimate 📅 Book Online
📍 Serving Los Angeles & Surrounding Areas
🏅 C-10 Licensed & Insured
⚡ EVITP-Certified #4051604
📋 Permits & Inspections Handled
Tesla Charger Installation

Complete Tesla Wall Connector Service for Your Los Angeles Home

AMY Electric provides full-service Tesla Wall Connector installation throughout Los Angeles. As EVITP-certified installers we handle the load calculation, the dedicated 60-amp circuit, mounting and hardwiring, commissioning and Wi-Fi setup in the Tesla app, and final inspection sign-off. We permit every install through LADBS and coordinate with LADWP where service work is required. Whether you drive a Model 3 in the Valley or a Model Y on the Westside, you get the full 11.5 kW charge rate your panel can support.

We know Los Angeles garages — from 1920s bungalows in Silver Lake with 100A panels to new builds in Playa Vista wired for EVs. Where panel capacity is short, we perform the 200A upgrade first ($2,500–$4,500) so the charger never starves. Every connection is torqued to Tesla's spec, scheduled charging and power sharing are demonstrated before we leave, and the work is backed by our workmanship warranty.

☎ Call (818) 302-5614 Free Estimate

Los Angeles Electrical Notes: Tesla Charging, Panels and Permits

Across Los Angeles the Tesla conversation starts with a load calculation: pre-1960 homes on 100A service usually need the 200A upgrade first, while post-1970 homes often accept the 60A Wall Connector circuit directly. LADWP territory means one consistent rebate process — up to $500 for qualifying Level 2 installs — stacking with the 30 percent federal credit. We permit through LADBS, handle inspection, and prepare the rebate paperwork under C-10 #981578. Standard installs run $500 to $1,200 plus the $475 unit — call (818) 302-5614 and the estimate includes the load math, not just a price.

We permit every install through LADBS, coordinate LADWP service work where required, and commission Tesla, ChargePoint, and universal stations as EVITP-certified installers under C-10 #981578. Standard garage installs run $350 to $900 with inspection handled — call (818) 302-5614 and the estimate includes the load math, not just a price.

FAQ

Tesla Charger Installation in Los Angeles — FAQ

How much does Tesla Wall Connector installation cost in Los Angeles? ▾
Tesla Wall Connector installation in Los Angeles typically costs $500 to $1,200, including the dedicated 60-amp circuit breaker, wiring and conduit from the panel, mounting and hardwiring, LADBS permit fees, inspection, and commissioning through the Tesla app. The Wall Connector unit itself (about $475) is purchased separately from Tesla. Homes needing a 200A panel upgrade first add $2,500 to $4,500. We provide free itemized estimates before any work begins.
Do I need a 60-amp circuit for the Tesla Wall Connector? ▾
The Wall Connector delivers its full 11.5 kW (about 44 miles of range per hour) on a 60-amp circuit, which is what we install whenever panel capacity allows. Where capacity is limited, we can commission it on a 50-amp or 40-amp circuit with proportionally lower charge rates — still a full overnight charge for most drivers. The free load calculation determines which your panel supports.
What is included in commissioning? ▾
Commissioning means connecting the Wall Connector to your home Wi-Fi through the Tesla app, setting the correct circuit amperage, enabling scheduled charging and power sharing if you have multiple Teslas, updating firmware, and walking you through charging schedules, amperage limits, and app notifications before we leave. It is included in every installation.
Are you licensed to install Tesla chargers in Los Angeles? ▾
Yes — AMY Electric holds California C-10 license #981578 in good standing with the CSLB, verifiable at cslb.ca.gov, plus EVITP certification #4051604 for charging infrastructure. We carry general liability and workers compensation insurance, permit every install through LADBS, and back the work with our workmanship warranty.
How long does installation take? ▾
Most Tesla Wall Connector installs take 3 to 5 hours: mounting, circuit wiring, conduit, commissioning, and cleanup in one visit. LADBS permit processing adds 24 to 72 hours beforehand. If a panel upgrade is required, plan 1 to 2 days total with the upgrade and charger completed consecutively.
Do I need a permit for a Tesla charger in Los Angeles? ▾
Yes — Los Angeles requires an electrical permit for hardwired EV charging equipment. We handle the entire LADBS process, typically $75 to $200 in fees, plus the final inspection. Permitted work protects your homeowners insurance coverage and avoids disclosure problems at resale.
Can you install the Tesla Universal Wall Connector for non-Tesla EVs? ▾
Yes — we install both the Tesla Wall Connector (NACS) and the Tesla Universal Wall Connector with its integrated J1772 adapter, so households with a Tesla and a non-Tesla EV can charge both from one station. We also install ChargePoint, JuiceBox, and NEMA 14-50 outlets for maximum flexibility.
☎ Call (818) 302-5614 Free Estimate

Need a Tesla charger installed in Los Angeles?

Call or request a free estimate — we respond same day.

☎ (818) 302-5614 Free Estimate Online
Call Now Text Message Get Estimate