Electrical Repair & Troubleshooting
in Los Angeles
Fast, safe diagnostics and repairs for breakers, outlets, wiring, lighting, and power issues. Same-day service when available.
What Electrical Problems Do You Fix in Los Angeles?
From a single tripping breaker to a full wiring fault — we diagnose fast and fix it right. All repairs are permitted when required and performed to NEC and LA code standards. The National Electrical Code (NEC) requires all electrical work to be performed by a licensed electrician per Article 600.
Breakers Tripping
Frequent tripping usually means an overloaded circuit, a faulty breaker, or a short. We find the root cause — not just reset and leave.
Dead Outlets
Dead outlets can mean a tripped GFCI, loose connection, or a wiring fault. We trace it and restore power safely.
Flickering Lights
Flickering usually signals loose wiring, an overloaded circuit, or a failing connection at the panel. Not something to ignore.
Partial Power Loss
If part of your home has lost power but the breaker isn't tripped, you may have a lost leg from the utility or a failing connection.
Burning Smell / Warm Outlets
Stop using that circuit immediately and call us. Burning smells or warm outlets indicate arcing — a serious fire hazard.
Aluminum Wiring
Many older LA homes have aluminum branch wiring. We safely remediate with approved COPALUM connectors or pigtailing.
GFCI & AFCI Outlets
Bathrooms, kitchens, garages, and outdoors require GFCI protection. We install and test to current code.
Wiring Upgrades
Old knob-and-tube or cloth-wrapped wiring? We assess, repair, or replace for safety and insurance compliance.
How Much Does Electrical Repair Cost in Los Angeles?
| Service | Typical Range |
|---|---|
| Diagnostic / Troubleshooting | $95–$175 |
| Outlet or Switch Repair | $150–$300 |
| Breaker Replacement | $150–$350 |
| GFCI / AFCI Upgrade | $175–$350 |
| Wiring Repair / Splice | $200–$500 |
| Aluminum Wiring Remediation | $800–$3,000+ |
Free estimate provided before any work. Diagnostic fee waived if repair is completed same visit.
Also Consider
Electrical Repair Project Photos
Browse representative project photos from electrical work across Greater Los Angeles. Equipment and scope vary by property.
200A panel upgrade at Los Angeles home
Subpanel with clearly labeled circuits in Sherman Oaks
Common Electrical Repair Scopes in Los Angeles
🔌 Dead Outlet / Switch
Diagnose and repair non-working outlets and switches. Often a tripped GFCI, loose wire, or failed device.
⚡ Tripping Breaker
Repeated breaker trips from overloaded circuits, short circuits, or ground faults. Root-cause diagnosis and repair.
💡 Flickering Lights
Flickering or dimming lights from loose connections, overloaded circuits, or failing fixtures. Safety inspection included.
🔥 Burning Smell / Warm Outlet
Emergency response for burning odors, warm outlets, or discolored faceplates. Immediate safety priority.
🌧️ Water + Electricity
GFCI failures, outdoor outlet repairs, and water-damaged electrical systems. Code-compliant GFCI protection.
🔧 Aluminum Wiring Repair
COPALUM and AlumiConn remediation for 1965-1973 homes with aluminum branch circuits. Fire-hazard mitigation.
Electrical Diagnostics and Repair Process
- Visual inspection: Check panels, outlets, switches, and wiring for visible damage, discoloration, or loose connections.
- Load testing: Measure current draw on circuits to identify overloads and verify breaker sizing.
- Continuity & resistance: Test wiring for shorts, opens, and high-resistance connections using multimeters and megohmmeters.
- Thermal imaging: Infrared camera scans identify hot spots in panels and connections before they become failures.
- Root-cause fix: We repair the underlying problem, not just the symptom. No temporary patches.
- Code verification: All repairs are brought up to current California Electrical Code standards.
Permits and Code for Electrical Repairs in LA
- Minor repairs: Replacing an outlet, switch, or fixture with an equivalent model using existing wiring typically does not require a permit.
- Permit required. New circuits, panel work, service upgrades, and any wiring modification require an LADBS electrical permit.
- Permit fees included. When a permit is needed, LADBS fees are included in our all-in quotes.
- Code compliance. All repair work meets current California Electrical Code and Title 24 requirements.
- Insurance documentation. Permitted work provides documentation for insurance claims and future home sales.
Los Angeles uses LADBS for electrical permitting. We handle the entire permitting process when required.
Electrical Repair FAQ
Do you offer same-day electrical repair? ▾
Is a permit required for electrical repairs? ▾
My breaker keeps tripping. Is that dangerous? ▾
Do you work on aluminum wiring? ▾
Need an Electrician in LA?
Call or request a free estimate — we respond same day.
☎ (818) 302-5614 Free EstimateTypical Pricing: Electrical Troubleshooting and Repair
Diagnostic visits run $150 to $350, with most repairs quoted firm after diagnosis. Emergency calls run $95 to $195 in business hours and $195 to $395 after hours, with diagnostics credited toward completed repairs. From our projects: 4.9 average from 87 verified reviews · licensed C-10 #981578, EVITP-certified #4051604 · serving Greater Los Angeles since 2012 · written itemized estimates on every job.
Recent Repair Calls
"During a rainy night, our Glendale home lost power due to a faulty outdoor outlet. AMY Electric responded within an hour for emergency repair, identified a ground fault issue, and had us back up and running quickly. Their same-day service saved us from potential water damage."
Our warranty: one year on all labor plus manufacturer warranties on materials. If anything we installed fails within 12 months, we return and fix it at no charge.
Request Service or an Estimate
Tell us what you need and a licensed electrician will follow up with clear options and honest pricing — usually within a few hours.