Electrical Safety Inspection
in Los Angeles

Professional evaluation of your home's electrical system. Panel assessment, wiring inspection, outlet testing, and safety recommendations. Includes detailed report and prioritized action plan.

☎ Call (818) 302-5614 Free Estimate 📅 Book Online

🔍 Comprehensive Evaluation

⚠️ Hazard Identification

📋 Detailed Report Provided

💰 $150-$400 Per Inspection

Inspection Services

Professional Electrical Safety Evaluation

From pre-purchase evaluations to annual safety checks, AMY Electric inspects your electrical system to current NEC and LA code requirements. We identify hazards, code violations, and recommend prioritized improvements.

🔧

Electrical Panel Evaluation

We inspect your panel for proper labeling, breaker condition, available capacity, and signs of overheating or damage.

📡

Wiring & Conduit Assessment

We check for outdated wiring (knob-and-tube, aluminum, cloth), proper grounding, and secure connections throughout accessible areas.

🔌

Outlet & Switch Testing

We test outlets for proper polarity, grounding, GFCI/AFCI function, and secure connections. We check for reverse polarity, open ground, and overload signs.

🔥

GFCI & AFCI Protection Check

We test GFCI outlets and breakers, and AFCI protection in bedrooms and living areas to ensure they trip when required.

📊

Load Calculation & Capacity Analysis

We calculate your actual electrical load vs. panel capacity to identify overload risks and recommend upgrades if needed.

📋

Detailed Report & Action Plan

You receive a prioritized report with safety concerns, code violations, and recommended improvements with cost estimates.

Recent Projects

Electrical Safety Inspection Project Photos

Browse representative project photos from electrical work across Greater Los Angeles. Equipment and scope vary by property.

Siemens 200A panel upgrade with exterior stucco finish - AMY Electric

Panel inspection at Los Angeles property

New subpanel installation with clearly labeled circuits - AMY Electric

Well-organized panel passes safety inspection

How It Works

Electrical Safety Inspection Process

Pre-Inspection Consultation

We discuss your concerns, the age of your home, and any specific issues you've noticed (flickering lights, warm outlets, etc.).

On-Site Evaluation (1-2 Hours)

We systematically inspect your electrical system: panel, wiring, outlets, switches, lighting, and accessible areas.

Testing & Measurements

We use calibrated testers to measure voltage, check polarity, test GFCI/AFCI function, and verify grounding throughout your home.

Report Generation & Review

We compile our findings into a clear, prioritized report with photos, code references, and recommended actions.

Walkthrough & Explanation

We walk you through our findings, explain any safety concerns, and answer your questions before we leave.

Investment

Electrical Safety Inspection Costs

Service	Typical Range
Basic Safety Inspection (single panel)	$150–$250
Comprehensive Home Inspection	$250–$400
Pre-Purchase Home Evaluation	$300–$500
Annual Safety Check (recurring)	$120–$200
Specific Circuit Evaluation	$100–$200

Includes detailed report with photos and recommendations. Free consultation available.

Related Services

Also Consider

🏠
Whole-Home Rewiring

🔌
Outlet & Switch Installation

FAQ
Electrical Safety Inspection FAQ

Do I need an electrical safety inspection if my home seems fine? ▾
Yes — many serious electrical problems develop gradually over time without obvious warning signs, which is why regular preventive inspections are recommended even when everything appears to be working normally. Hidden issues that can exist in a seemingly fine home include loose connections at the panel or outlets that can generate heat and eventually fail, deteriorating wire insulation in older homes, corroded connections from moisture or pest activity, improperly installed DIY work from previous owners, overloaded circuits that are functioning at or near their maximum capacity without tripping, and outdated wiring methods like knob-and-tube or early aluminum wiring that may not meet modern safety standards. The National Fire Protection Association recommends a home electrical safety inspection at least every 10 years for existing homes, and more frequently for homes over 40 years old. We recommend an inspection if you have recently purchased an older Los Angeles home, before starting a major renovation, or if your home has knob-and-tube or aluminum wiring.

How often should I get an electrical safety inspection? ▾
The recommended frequency for electrical safety inspections depends on the age and condition of your home. For most Los Angeles homes, a professional electrical inspection every 5 to 10 years is adequate if the home is less than 40 years old and has no known issues or history of electrical problems. Homes over 40 years old should be inspected more frequently — every 3 to 5 years — because wiring insulation degrades over time and older electrical systems may not meet modern safety standards. An inspection is also recommended before purchasing a home, before starting a major renovation that will add significant electrical load, after any significant electrical event like a lightning strike or power surge, and in homes with known risk factors such as aluminum wiring, knob-and-tube wiring, Federal Pacific or Zinsco panels, or a history of DIY electrical modifications. We help Los Angeles homeowners determine the right inspection schedule for their specific home's age and condition.

What does an electrical safety inspection cover? ▾
A comprehensive electrical safety inspection covers every major component of your home's electrical system. We begin at the service entrance, inspecting the meter socket, service mast, weatherhead, and main service conductors for damage, corrosion, and proper clearances. At the panel, we check all breaker connections for tightness, look for signs of overheating or arcing, verify proper bonding and grounding, and ensure all circuits are correctly labeled. We then test a representative sample of outlets, switches, and light fixtures throughout the home for proper polarity, grounding, and GFCI/AFCI protection where required. We inspect visible wiring in the attic and crawlspace for signs of rodent damage, insulation deterioration, and proper support. We also test smoke and CO detectors, check bathroom and kitchen GFCI protection, and inspect outdoor outlets and lighting for weather resistance. After the inspection, we provide a detailed written report with any issues found and prioritized recommendations.

Is an electrical safety inspection the same as a permit inspection? ▾
No — an electrical safety inspection and a permit inspection serve different purposes, though both involve a licensed professional evaluating your electrical system. A permit inspection is performed by the local building department (LADBS in the City of Los Angeles) to verify that recently completed electrical work meets code requirements and is safe for use — this is a pass-or-fail inspection focused on a specific permitted project. An electrical safety inspection, on the other hand, is a comprehensive evaluation of your existing electrical system by a licensed electrician, not a building inspector, covering all components regardless of whether any recent work has been performed. The safety inspection identifies problems proactively before they cause failures, while a permit inspection is reactive and confirms work already completed. They complement each other — a safety inspection before a renovation helps identify issues that should be addressed as part of the permitted work.

How long does an electrical safety inspection take? ▾
A standard residential electrical safety inspection for most single-family Los Angeles homes takes approximately 1 to 2 hours, depending on the size and complexity of the home and the number of outlets, switches, and fixtures that need to be tested. Smaller condominiums or apartments may take 45 minutes to 1 hour, while larger homes over 3,000 square feet, homes with multiple subpanels, or properties with known electrical issues may take 2 to 3 hours for a thorough evaluation. During the inspection, we systematically work through the home from the service entrance to every room, testing outlets, switches, and fixtures along the way. We provide the detailed written report and prioritized recommendations at the conclusion of the inspection, along with a no-obligation quote for any recommended repairs or upgrades.

Is Your LA Home's Electrical System Safe?

Get a free quote for a professional electrical safety inspection in Los Angeles.
☎ (818) 302-5614 Free Estimate

Related

Related Services & Resources

Electrical RepairsFix issues found during inspection Panel UpgradesUpgrade if inspection recommends it Whole-Home RewiringRewire if wiring is unsafe

Electrical Safety Inspectionin Los Angeles