What Is EVITP Certification?
And Why It Matters for EV Charger Installation in LA
If you are shopping for an EV charger installer in Los Angeles, you have probably seen the term "EVITP certified." It sounds impressive — but what does it actually mean, and does it matter for your installation?
Short answer: EVITP certification means the electrician has completed ~20 hours of training specific to EV charging installation, including NEC Article 625, load calculations, and commissioning. It means the electrician has completed specific EV charging installation training, including NEC Article 625, load calculations, and commissioning — and AMY Electric holds certification #4051604.
Published: September 7, 2026 · Updated: September 7, 2026
What Is EVITP Certification?
EVITP stands for Electric Vehicle Infrastructure Training Program. It is a California-specific certification for electricians who install EV charging equipment. The program covers:
- NEC Article 625 — the specific code section governing EV charging installations
- EVSE load calculations — sizing circuits, breakers, and panels for charger loads
- DC fast charging fundamentals — even though most homes get Level 2
- Commissioning and testing — verifying the installation works safely
- Manufacturer-specific training — Tesla Wall Connector, ChargePoint, JuiceBox, and others
The certification requires approximately 20 hours of training plus a proctored exam with a 70% passing threshold. It costs $275 and is valid for 3 years before renewal.
Why EVITP Certification Matters for LA Homeowners
Fewer inspection failures
EVITP-trained electricians understand LADBS inspection requirements for EV charger circuits. The inspector checks breaker sizing, conduit installation, GFCI protection, and labeling — EVITP training covers all of these.
Correct equipment selection
Not all EV chargers work in all homes. An EVITP-certified electrician evaluates your panel capacity, charger location, and daily driving habits before recommending a unit. This prevents the expensive mistake of buying a charger that your panel cannot support.
Rebate eligibility
LADWP requires a licensed C-10 contractor for the $500 rebate. EVITP certification goes further — it signals that your installer has specialized EV training, which matters for CALeVIP, SCE Charge Ready, and other utility programs that require EVITP-trained electricians.
Safety
A 240V/40-50 amp circuit in a garage or outdoor area involves significant electrical load. EVITP training emphasizes proper grounding, conductor sizing, and outdoor protection — the details that prevent fires and electrocution.
EVITP vs. C-10 License: What Is the Difference?
These are two different credentials that serve different purposes:
| Credential | What It Covers | Required for EV Chargers? |
|---|---|---|
| C-10 Electrical License | All electrical work — wiring, panels, outlets, fixtures, EV chargers | Yes — legally required for any EV charger installation in California |
| EVITP Certification | Specialized EV charging installation training — NEC Article 625, load calculations, commissioning | Not legally required for private residential, but strongly recommended and required for utility-funded programs |
A C-10 license without EVITP can legally install your EV charger. But an EVITP-certified electrician has proven they understand the specific requirements of EV charging — from load calculations to inspection readiness. Think of it as the difference between a general contractor and a specialist who does this work every day.
AMY Electric Holds EVITP Certification #4051604
AMY Electric is EVITP-certified under certification number #4051604. This means:
- Our electricians have completed the EVITP training program
- We are listed on the official EVITP California contractor page
- Every EV charger we install is performed by an EVITP-trained electrician
- We have helped over 200 LA homeowners with EV charger installations
- We handle LADWP rebate paperwork, LADBS permits, and inspections
When you hire AMY Electric for your EV charger installation, you get a C-10 licensed, EVITP-certified contractor — not a subcontractor, not a sales team that outsources the work.
When Is EVITP Certification Required?
Most private residential EV charger installations do not legally require EVITP — a C-10 license is sufficient. However, EVITP is required or strongly preferred in these situations:
- CALeVIP rebates — requires EVITP-Approved contractor
- SCE Charge Ready programs — requires EVITP-certified electrician
- Clean Cars 4 All — requires EVITP for charger installations
- Multi-unit dwellings — HOAs and property managers increasingly require EVITP
- Commercial EV charging — most commercial programs require EVITP
If you plan to pursue any utility rebate beyond the basic LADWP $500, EVITP certification is not optional — it is a requirement. Even if you are not pursuing rebates now, choosing an EVITP-certified electrician future-proofs your installation.
How to Verify an Electrician's EVITP Status
Do not take "EVITP certified" at face value. Verify it yourself in two steps:
- Check the contractor page: Visit evitp.org/california and look for the company name. This confirms the company is "EVITP Approved."
- Check the individual electrician: Search db.evitp.org by last name or certification number. This confirms the specific person installing your charger holds current certification.
EVITP certification expires after 3 years. An expired credential is as good as none — always verify current status before hiring.
Frequently Asked Questions About EVITP
Is EVITP required for my home EV charger installation? ▾
How do I verify AMY Electric's EVITP status? ▾
Does EVITP certification cost more? ▾
How many EV chargers has AMY Electric installed? ▾
Ready to Install Your EV Charger?
AMY Electric is EVITP-certified, C-10 licensed, and has completed 200+ installations across LA.
☎ Call (818) 302-5614Free EstimateWritten by Amy
California C-10 Licensed Electrician · EVITP Certified #4051604 · 15+ Years Experience
Amy is the founder and lead electrician at AMY Electric, serving Greater Los Angeles since 2012. He holds a C-10 Electrical Contractor License (#981578) and EVITP Certification (#4051604). He has personally performed over 200 EV charger installations and has deep expertise in NEC Article 625, LADBS permitting, and utility rebate coordination.