Warehouse & Commercial Lighting Installation Cost in Los Angeles:
Complete Guide [2026]
C-10 Licensed #981578
$2–$6 Per Sq Ft
Title 24 Compliant
What warehouse and commercial lighting installation costs in Los Angeles in 2026: LED retrofit pricing per sq ft, project bands, LADWP/SCE rebates, Title 24 controls, and how the process runs from a C-10 licensed team.
Published: October 2026 · Updated: October 2026
Planning a Commercial Lighting Project in LA?
AMY Electric handles LED retrofits, high-bay installation, controls, Title 24 compliance, and rebates — all priced in writing before work begins. C-10 #981578.
01 · Pricing
What Commercial Lighting Installation Costs in Los Angeles
Warehouse and commercial lighting projects are priced per square foot or per fixture. These are the prices AMY Electric publishes for Los Angeles projects in 2026:
| Scope / Item | Typical Range | Notes |
|---|---|---|
| LED High-Bay Retrofit (per sq ft) | $2 – $4 | Existing fixtures retrofitted with LED lamps/drivers |
| New High-Bay Installation (per sq ft) | $4 – $6 | New fixtures, wiring, and mounting |
| Small Project (under 5,000 sq ft) | $5,000 – $15,000 | Retrofit or new, basic controls |
| Medium Project (5,000–20,000 sq ft) | $15,000 – $50,000 | LED + controls + Title 24 compliance |
| Large Project (20,000+ sq ft) | $50,000+ | Full retrofit with smart controls and rebates |
| LADBS Permit & Inspection | $200 – $450 | Included when required |
Ranges reflect Los Angeles labor rates and project size. A site visit confirms the exact scope and rebate eligibility. Estimates are free and provided in writing.
02 · LED retrofit vs new
LED Retrofit vs New Installation
- LED retrofit. Reuses existing fixtures with LED lamps or drivers. Lower cost ($2–$4/sq ft), faster, less waste.
- New installation. Replaces fixtures entirely. Higher cost ($4–$6/sq ft) but allows layout changes and modern designs.
- When to retrofit: existing fixtures are in good condition and layout works.
- When to replace: fixtures are damaged, layout is poor, or you want smart controls.
03 · Rebates and Title 24
Rebates, Incentives, and Title 24 Compliance
- LADWP/SCE rebates. Commercial LED upgrades qualify for rebates, often $0.10–$0.50 per kWh saved. AMY Electric helps with the application.
- Title 24. California's energy code requires lighting power density limits and controls (occupancy sensors, daylighting, dimming) for commercial projects.
- Controls and sensors. Occupancy sensors, daylight harvesting, and dimming reduce energy use and qualify for additional incentives.
- Payback. Most LED retrofits pay back in 1–3 years through energy savings and rebates.
04 · Permits and code
Permit and Code Considerations for Commercial Lighting in LA
- Permit required. New circuits, panel work, or significant changes require an LADBS electrical permit and inspection.
- Permit fees included. LADBS fees ($200–$450) are included in our all-in quotes.
- Code compliance. Work must meet California Electrical Code and Title 24 requirements.
- Safety. High-bay work requires proper lift equipment and fall protection.
Los Angeles uses LADBS for electrical permitting. Never hire a contractor who suggests skipping the permit.
05 · Process
Our Commercial Lighting Process
- Site visit and audit. We assess existing fixtures, layout, and energy use, then provide a written estimate with rebate projections.
- Design. We recommend retrofit vs. replacement and the right controls for Title 24 compliance.
- Permit filing. We file LADBS permits before work begins.
- Installation. We install fixtures, wiring, and controls with minimal disruption.
- Inspection. LADBS inspects; we attend and provide the passed inspection record.
- Rebate filing. We provide documentation for the LADWP/SCE rebate application.
06 · FAQ
Frequently Asked Questions
How much does warehouse lighting installation cost in Los Angeles?
Warehouse and commercial lighting in Los Angeles costs $2 to $6 per square foot for an LED high-bay retrofit, with total projects running $5,000 to $50,000 or more. Costs depend on ceiling height, fixture count, wiring condition, and controls. AMY Electric provides firm written quotes after a site visit.
Is an LED retrofit cheaper than new installation?
Yes. Retrofitting existing fixtures with LED lamps or drivers costs less than removing and replacing the entire fixture. A full retrofit typically runs $2–$4 per sq ft; new high-bay installation runs $4–$6 per sq ft. AMY Electric assesses which path saves more during the site visit.
Are there rebates for commercial LED lighting in LA?
Yes. LADWP and SCE offer rebates for qualifying commercial LED upgrades, often $0.10–$0.50 per kWh saved. AMY Electric helps with the rebate application and documentation. Incentives change, so we confirm current programs during the quote.
What is Title 24 and does it apply to my project?
Title 24 is California's energy code. Commercial lighting projects must meet lighting power density limits and include controls (occupancy sensors, daylighting, dimming). AMY Electric designs to Title 24 and provides compliance documentation.
How long does a warehouse lighting retrofit take?
A typical warehouse retrofit takes 2 to 7 days depending on size and ceiling height. Work is often phased to avoid disrupting operations. LADBS inspection follows completion if a permit is required.
Do I need a permit for commercial lighting in LA?
Yes for new circuits, panel work, or significant changes. Simple lamp swaps may be permit-exempt. AMY Electric files LADBS permits and attends the inspection. Permit fees ($200–$450) are included in all-in quotes.
Planning a Commercial Lighting Project?
AMY Electric provides free written estimates for commercial lighting across Greater Los Angeles. C-10 #981578.