Dedicated Circuit Installation Cost in Los Angeles:
Complete Guide [2026]
What dedicated circuit installation costs in Los Angeles in 2026: per-appliance pricing, NEC code requirements, LADBS permits, and how the process runs from a C-10 licensed team.
Published: October 2026 · Updated: October 2026
What Dedicated Circuit Installation Costs in Los Angeles
A dedicated circuit serves a single appliance or device, preventing overloads and tripping. These are the prices AMY Electric publishes for Los Angeles projects in 2026:
| Scope / Item | Typical Range | Notes |
|---|---|---|
| Dedicated Circuit (standard) | $250 – $600 | 20A circuit, standard distance from panel |
| EV Charger Circuit (50A) | $350 – $750 | Dedicated 50A circuit for Level 2 charger |
| Appliance Circuit (dryer, range) | $300 – $700 | 30-50A circuit with proper wire gauge |
| Subpanel (if panel full) | $800 – $2,000 | When no breaker space is available |
| Panel Upgrade (if needed) | $2,500 – $4,500 | 100A to 200A upgrade |
| LADBS Permit & Inspection | $200 – $450 | Included in all-in quotes |
Ranges reflect Los Angeles labor rates. A site visit confirms the exact scope. Estimates are free and provided in writing.
What Appliances Need a Dedicated Circuit (NEC)
Refrigerator
NEC requires a dedicated circuit for refrigeration equipment.
Dishwasher
Dedicated 20A circuit required for dishwasher and disposal.
Washer/Dryer
Each requires its own dedicated circuit (120V washer, 240V dryer).
Range/Oven
50A dedicated circuit for electric ranges and ovens.
EV Charger
Dedicated 50A circuit for Level 2 EV chargers.
HVAC
Dedicated circuit for AC units and heat pumps.
Permit and Code Considerations in LA
- Permit required. Adding a dedicated circuit requires an LADBS electrical permit and city inspection.
- Permit fees included. LADBS fees ($200–$450) are included in our all-in quotes.
- Code compliance. Work must meet California Electrical Code and NEC requirements.
- Load calculation. AMY Electric performs a load calculation to confirm panel capacity.
Los Angeles uses LADBS for electrical permitting. Never hire a contractor who suggests skipping the permit on new circuit work.
Our Dedicated Circuit Installation Process
- Site visit and load calculation. We assess panel capacity and appliance requirements, then provide a written estimate.
- Permit filing. We file the LADBS permit before work begins.
- Installation. We run new cable, install the breaker, and connect the outlet or appliance in one visit.
- Inspection. LADBS inspects; we attend and provide the passed inspection record.
- Testing. We test the circuit under load and verify safe operation.
Frequently Asked Questions
How much does dedicated circuit installation cost in Los Angeles?
What appliances need a dedicated circuit?
Do I need a permit for a dedicated circuit?
Can I add a dedicated circuit to a full panel?
How long does dedicated circuit installation take?
AMY Electric provides free written estimates for dedicated circuits across Greater Los Angeles. C-10 #981578.